OPTO 22 – Z240D10 _ Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR)
OPTO 22 – Z240D10 _ Z Model, 240 VAC, 10 Amp, DC Control Solid State Relay (SSR)
Quick Specs:
- Z Model
- 240 VAC
- 10 Amp
- DC Control Solid State Relay (SSR)
The Z240D10 is a DC-controlled relay that switches 240 VAC at up to 10 A.
Z Series SSRs use a unique heat transfer system that makes it possible to produce a low-cost, 10-amp, solid state relay in an all-plastic case. The Z series is ideal for high-volume OEM applications because of its push-on, tool-free quick-connect terminals. Operating temperature:- 40 °C to 100 °C.
Lots of information on choosing and using SSRs can be found in the SSR data sheet. Also see the Manufacturers’ part number cross-reference list.
This SSR carries a lifetime warranty.
NOTE: We do not recommend mounting the terminal side of the SSR to a flat PCB (printed circuit board) or other flat surface, because there may be some variation in terminal height or alignment from one terminal to another and from one SSR to another. For PCB boards, use the MP or P series SSRs.
Specifications:
120/240 Volt Solid State Relays
AC Power Series 120/240 Volt:
Plastic Package (Z Series)
|
Z120D10 |
Z240D10 |
|
|
Nominal AC Line Voltage Nominal |
120 |
240 |
|
Current Rating (Amps) |
10* |
10* |
|
1 cycle Surge (Amps) Peak |
110 |
110 |
|
Nominal Signal Input Resistance (Ohms) |
1000 |
1000 |
|
Signal Pick-up Voltage |
3VDC (32V allowed) |
3VDC (32V allowed) |
|
Signal Drop-out Voltage |
1 VDC |
1 VDC |
|
Peak Repetitive Voltage Maximum |
600 |
600 |
|
Maximum Output Voltage Drop |
1.6 volts |
1.6 volts |
|
Off-State Leakage (mA) Maximum** |
6 mA |
12 mA |
|
Operating Voltage Range (Volts AC) |
12-140 |
24-280 |
|
I2t Rating t=8.3 (ms) |
50 |
50 |
|
Isolation Voltage |
4,000 VRMS |
4,000 VRMS |
|
øjc*** (°C/Watt) Dissipation (Watts/Amp) |
4 |
4 |
| Agency Approvals | CE, CSA, RoHS, UKCA | CE, CSA, RoHS, UKCA |
|
Notes: |
