OPTO 22 – SNAP-AIV2-i _ SNAP 2-Ch Isolated -100VDC to +100VDC Analog Voltage Input Module
OPTO 22 – SNAP-AIV2-i _ SNAP 2-Ch Isolated -100VDC to +100VDC Analog Voltage Input Module
Quick Specs:
- SNAP 2-Ch Isolated -100VDC to +100VDC Analog Voltage Input Module
The SNAP-AIV2-i provides two isolated channels of analog voltage input, -100VDC to +100VDC. In addition to having two channels isolated from each other, the module is also transformer isolated and optically isolated from other modules and devices.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
Build your system in the SNAP I/O Configurator.
Specifications:
|
Input Range |
From -100 volts to +100 volts |
|
Maximum Over Range |
± 10% |
|
Resolution |
4.0 mV when configured -100 volts to +100 volts |
|
Input Filtering |
-3 dB @ 64 Hz |
|
Input Response Time |
63.2% / 6.7 V / 10 mS |
|
DC Common Mode Rejection |
>-120 dB |
|
AC Common Mode Rejection |
>-120 dB @ 60 Hz |
|
Maximum Survivable Input |
220 VAC or 300 VDC |
|
Maximum Operating Common Mode Voltage |
250 V |
|
Accuracy |
0.05%, 50 mV @ 100 VDC |
|
Gain Temperature Coefficient |
30 PPM/ °C |
|
Offset Temperature Coefficient |
15 PPM/ °C |
|
Isolation: Optical |
4000 V |
|
Isolation: Transformer |
1500 V |
|
Isolation: Channel to Channel |
250 V continuous |
|
Power Requirements |
5 VDC (±0.15) @ 200 mA |
|
Input Resistance |
1 megohms (each channel) |
|
Ambient Temperature: |
-20 °C to 70 °C |
|
Humidity |
5-95%, non-condensing |
|
Torque, hold-down screws |
4 in-lb (0.45 N-m) |
|
Torque, connector screws |
5.26 in-lb (0.6 N-m) |
|
Wire size range |
22 to 14 AWG |
|
Agency Approvals |
CE, RoHS, DFARS; UKCA |
|
Warranty |
Lifetime |
